Monday, October 12, 2015

Dr. Zooch Ares I-X, Build, Part 15, Ends and Edges



The escape tower dowel and shrouds were glued onto the capsule top.

Sight from the sides and from the top to be sure it is straight.
Turn the rocket body and make adjustments before the glue sets up.


Right below the rear shroud is a short, uncovered length of BT-20.
The white tube didn't match the white of the shroud.

I sprayed some copy paper with the same white I used on the build.




Here's the painted paper wrapped in place with a glue stick.

No comments:

Post a Comment