Here's how I set the glue down on the outside laminate pieces. I wanted good coverage but not so much that the laminations could slip...

I'm not sanding the fin root edge here, I set the fin on my flat sanding block so you can see the curvature on the root edge. The sand...

Normally I would sand a rounded fillet area with sandpaper over a Q-tip for a cushion. If you have a very tight inside curve to sand, the Q...

The instructions are vague about how to cut the fin slots, just a knife and some arrows. Instead of trying to cut around the corners...

From the October 11 N.E.F.A.R. launch, I posted this picture and copy:  I did a double take when I read the name on Scott Border's Asce...

The Ebay auction for the finished SR-71 Blackbird finishes up Monday night at around 9:00 p.m. EST. To see it, CLICK HERE              ...

The ends have to be cut off the tail cone. The instructions show a hobby knife being used. You can use a knife but I have better resul...