The vertical body decals are centered between the fins and upper roll pattern wrap decal. TIPS: Make a light pencil line at the center poin...

Here's the mask for the larger red fins -  Marked Scotch tape went into the root edges, Brown masking tape filled the areas between the ...

I'm doing the red masks in two separate sections, the upper body first. The upper fins were stuck down on masking tape on some cardboard...

I couldn't see a good way to mask the smaller red fins with the cardstock black shroud right below it. I knew I had to paint these fins ...

Here's a weird paint mask to give your a better glue bond on the root edges of the vanes. The engine mount is not glued in place yet. Sl...

The scanned shroud was loaded into Corel Draw. Four slightly different sized were copied. Out of these four I should have one that will fit....

Now that I'm using thicker fin stock, the toothpicks on the outside edge looked spindly. I decided to go with a 1/8" dowel. On the ...