Draw a pencil line down the Nacelle tube. Glue the P1 support pieces onto the line, even with the front end of the tube. The picture on the...

The stabilizer is even with the end of the body tube. The raceway sits on top, 1" from the end. These are still dry fittings, don't...

Step 7 in the instructions have you build up the raceway on the model, then sand the ends "to a point". This is when I steered awa...

I needed two Estes NCW-1 nose cone weights. I found an single original lead weight in my spare parts drawer. The older Estes catalogs say on...

The original Mini Bomarc kit had a 10" parachute. Estes makes a 9" chute, but I didn't want to spend the $4.49 price. I have a...

The old Estes instructions don't mention it, but I rounded the leading edges of the wing, stab and rudder. I also rounded the leading ed...

The small (BT-5 size) nacelle intake nose cones are difficult to fill. There are some inside angles that should be sharp and remain round. O...