Pigagus! Build Part 10 Fin Primer

Here’s the balsa and launch lug ready for their coat of primer.

I’ll usually place masking tape, sticky side up on a scrap piece of cardboard and lightly set the fins on the tape. I make the tape less sticky by setting the tape on my jeans pant leg and removing it. Lint is left on the sticky surface making it less tacky.

Smaller fins are stuck standing up with the root edges on the tape.
Larger fins like these are set down flat, rather than running the risk of them falling over under their own weight.

I'll shoot one side with primer and let dry. Everything is flipped over and shot again.