Pigasus! Build Part 1 Parts

Here's all the parts for the PIGASUS build

Some different components:

• The nose cone is pre-drilled for the 1/2 oz. of clay nose weight.
• Below the nose cone is the plywood plug, It's glued in after the clay is pressed in place and gives a solid hold for the screw eye.
• Way at the top is a short section of body tube. That'll be part of the pig's nose.
• All that bagged balsa is just scrap. I'll piece together some and use other 3/32" sheet balsa I have on hand.
• The parachute kit was pulled from my Pipeline kit supplies. It's a strong red plastic sheet I found that doesn't like to stick to itself after packing.