The larger fins are glued on the four printed lines.
The stub fins center between those.
If you masked the root edge before painting you should have a strong enough bond without cutting through the lower wrap.
I didn't think about the inside fin overhang on the root edges. I'll have to touch that up.
The color separation on the outside edge of the far right fin will need some cleaning up.
Here's all the fins are glued in place.
A shot of clear coat will help blend the painted and printed surfaces.
Wow - that's really clean! All those structures and b&w look great in that scale. Excellent work, and excellent coverage of your build.
ReplyDelete