Quest Launcher Fix

I'd always like the looks of the Quest "Lift-Off" launcher.

I bought a Quest starter set from EBAY for a very low price. Heck, the price of the entire starter set was $6.00!! The shipping was $11.00. Still a great price.

The fit of the legs into the center hub were a little loose.

I ran a bead of thick CA gel along the leg slot and let it dry.

With the CA "shim", the fit of the legs was too tight at first.

I sanded the CA bead down with some 220 grit sandpaper on a block until a good, friction fit was obtained.