Pages

Wednesday, July 14, 2010

Carded MMX Estes Sky Writer Post 8


Cutting out those curves on the nose cone shoulder wrap is tight, so I got out my hole punch.

Set on the smallest tube I could punch out the inside convex curves easily. The outside curves were cut with scissors.



Here's the start of the shoulder wrap.
Just glue the end and let dry before wrapping.
Two wraps around and you should be at the diameter of the main body tube.
Roll the round ends down over the taper of the point.

The pencil lead was drawn in with a Sharpie pen.

No comments:

Post a Comment