Big Girtha Build Priming Part 14

Here's the rear of the body tube after priming and removing the tape from the fin location lines. This shows how much can be sanded off, leaving primer in what was left of the tube spiral after the Carpenter's Wood Filler was sanded off earlier.

After sanding the primer I noticed a shallow buckle in the tube. I'll have to fill this or it'll show through the finish.

I scraped out the primer from the crimp and added some thinned Carpenter's Wood Filler.

I rubbed some thin CA over the filler to "lock" it to the surface.

After sanding It was ready for the fins.