MX-774 Kitbash Fix! Post 20

After reading Mr. Wilfong's Kitbash instructions, I realized I made a mistake!
Nothing major, I cut the upper band to 1/4" width. It should have been 3/8" wide.

Here's how I cut tape strips.

I lay the tape on the glass of my sliding glass patio door.

Set your straightedge on the tape and cut with a razor blade.

Don't worry, if the window is glass, the blade won't scratch it.

I find it easier to see the cut in daylight and if the window is clean, the underside of the tape will be clean too.

Here's the 3/8" wide strip in place. It's a subtle difference but closer to the truth.