The model got an overall white undercoat, then Rusto Metallic Bright Silver.
Along with one half of the nose cone, the only other black paint goes on the two larger rear fins.
I used my regular Scotch tape mask.
The corners were rounded off a bit.
Masking tape and grocery bags followed.
With the big intake tube so close there is some areas where the paint could sneak in. Double check for any open areas and apply more tape if in doubt.
After spraying with the Rusto black night metallic the tape was pulled.
My Titebond M&TG fillets were smooth and the mask lines came out sharp.
No comments:
Post a Comment