MPC USS Enterprise Build, Part 5, 24mm Engine Mount Part B

What I couldn't reach with the Dremel was trimmed back with my knife.








Here's the BT-50H tube in place. You can see the ribs against the tube.
Yes, the tube hasn't been cut to the final length yet.

The engine cap will need a notch for an engine hook.
Rough cut the notch with a knife and file the final shape.

The engine mount tube was cut with 1/8" extending beyond the engine cap.
The upper end extends 1/2" above the top of the ribs.

Look inside - there's a notch cut for a replaceable Kevlar line.