Estes Tech Pak Build Part 5, Engine Mount, Shock Cord and Parachute

The engine mount construction is standard.
There is not engine block above the engine.

Even though I rolled the orange tube as tight as I could, the mount fit was loose.
The wide green centering ring got 1 1/2 wraps of copy paper for a better fit.

I don't normally use a tri-fold mount but I wanted to build this one stock.

On the left I'm pre-rolling the mount to an arc shape to better fit the inside of the rolled tube.
The nose cone was also too loose. The shoulder got a wrap of masking tape.

The parachute is pre-assembled.
I hadn't seen this print before, it reminds me of Spider Man.
The shroud lines were tied too tight and have torn into the reinforcement disks.