The 1/4" diameter lug seams were filled before gluing on the model.
The two lugs were big enough to use two Q-tips for a handle.
I don't have a 1/4" rod to line up the lugs.
A 1/4" rod would probably be to heavy to use like this anyway.
Instead, the aluminum was used to check the two lugs.
I always roll the glue fillets around the front end of the lugs.
Roll the cotton end of the Q-tip between your thumb and index fingers and shape it to more of a point. With the end a little smaller you can pick up or roll over the glue fillet at the end of the lugs.
No comments:
Post a Comment