Quest Aurora Build, Part 7, Flaps and Rudders

The flap crack lines weren't very straight when the wing was flipped over.
To make a better "fold" line I used the rounded top side of a razor blade to score the fold on the top.

The end of the wing was starting to split when it was lifted.

The crack was held shut with tweezers and a drop of thin CA was set on the crack. This held the wood closed.







Cut off the gray sides from the template and flip over the wing.
Set the template on the wing and trace the rudder lines with pencil.








Here's how the rudder pieces sit on the wing.
The rear of the rudder stops the upward movement of the flaps.