Pages

Thursday, June 23, 2016

Estes Interceptor Build #1250, Part 10, Fin Gluing



Here's all the fins in place, viewed from the rear.

The six fins are not spaced at 60 degree intervals.
Note the wing fins are not evenly placed but slightly below the center line of the body tube.




All the fins are in line with the center point of the body tube.
Enlarge the picture to see the pencil lines I drew that intersect at the center.

A side view with all the fins glued on.

The upper fins are glued 1/2" from the rear of the tube, the large main wings are glued 3" up from the end.

No comments:

Post a Comment