Estes Skydart II #3229 Build, Part 21, Decals

The N3003 decal was placed on the stabilizer like in the original kit placement.

Notice the tape still on the adjustment screw. This was placed so no white spray got on the screw threads. The screw was also turned all the way down so no paint could get in or near the hole.




Set the door and window side strip down first. Center the door in line with the nacelle. that puts the windows at the slightly raised correct height.

After this side is in place you can line up the other side decal that just has windows and no door.





The first kit had just the SKYDART name below the cockpit windows. I left off the ASTRON and used just SKYDART II.



Here's how the nose cone decals ended up.