The small antenna pieces are glued onto the lightly etched laser lines.
The dowel guns are glued onto the wing tips.
The wing tips are glued on at an angle.
The dihedral guide pieces are glued together looking like short stairs. It is set under the wing to get the correct down angle of the wing tips.
The 1/4" diameter launch lug had the seams filled before gluing onto the rocket. Here I'm cleaning up the ends like I would with a regular body tube. The inside edges got a wipe of CA glue.
TIP: After priming and sanding the ends were cleaned up using the taper of a sharpened pencil.
No comments:
Post a Comment