The BIG Fix, Gyroc Elastic, Part 2

The elastic is double knotted on one end. Feed the elastic through the wing flap from the underside until the knot rests against the flap.

Slide the open end through the rudder notch. When the flap is pulled up against the rudder, mark the elastic at the notch.

The second elastic piece is cut using the first one as a guide for the length.
These turned out to be around 1.15" long between attachment points.

Feed the elastic through the wing flap hole again.

Tie a knot at the mark made earlier.

Slide the end knot of the elastic through notch in the rudder. Notice there is enough of the loose end to each grab it with fingers.







Loaded with an A8-3, Ready for launch this weekend!

Between flights, remove the elastic from the rudder notch.