In the last post I mentioned how the leg housing sides weren't "Mirrored".
You can see the raised area near the side housing root edge. This is a crushed area from the die-cutting. I haven't glued the housing sides on yet.
Just to keep track, I marked the inside of the housing sides with an "X". These are easy to get mixed up.
After a rub with the back end of a Sharpie to press in the raised areas, I did a light coat of medium CA applied with a Q-tip. Keep the CA glue away from the root edge and glue areas.
This was lightly sanded with 400 grit.
Now it's starting to look like a Mars Lander.
Both sides of the housing are glued on and are straight.
Wow! This looks like a fantastically-fun mini-engine midget!
ReplyDeleteHi Overeasy,
DeleteIt's a cute little rocket, very small. I think it needs a parachute, if I can't fit it in, I'll make a doubled over streamer.