Estes Leo Space Train #7285 Build, Part 12, Another Mask & Gluing It Together

The black on the underside is extended back, down the tube from the lines already masked on the nose cone.



This was my first build, the second and third builds had the black extended all the way to the back of the main body tube.

The gray support assembly, parts H, I, J and K were glued onto the top of the wing center.

TIP: Here I used a paper towel to make for a soft clamp that won't scar the balsa wood.

This is the back end clamp.

The upper engine had the black nozzle assembly glued in.


The nose cone fit was loose and needed a wrap or two of masking tape for a good fit.