Semroc MMX Orbital Transport, KMX-01, Build Part 7, Motor Housing Gluing

The engine housings are glued into the remaining slots on the bottom of the wing.

These slots also require filling with CWF and smooth sanding.

The smaller auxiliary fins are glued on the top and bottom.
The small ones are on the top, the back of the orbiter glider rests on these. Like the small fins on the wings, the taller side is to the rear.

One of the supplied templates is used for positioning. Use the inside slots for these fins.

The larger auxiliary fins are on the bottom.
The outside slots on the template are used for these.