ASP MMX Micro Corporal Build, Part 7, Streamer & A Fix

I find it easier to lay the Kevlar line over the center of the streamer then tape the line in place.  This holds the streamer and line still while placing a piece of Scotch tape over the Kevlar.

It's hard to see, but the tape is placed while on the tip of the blade. This keeps fingerprints and skin oil off the sticky side of the tape.

It's hard to get the shock cord into a small body tube.

TIP: Use some long tweezers to get the line inside.






I looked down the body tube and realized on tunnel was glued on crooked.

I carefully cut it off the body tube with a single edge razor blade. It was glued back on straight, filleted, sanded and painted.