TLP Hawk Build, Part 4, Tail Cone

This "kit" didn't include actual printed shrouds, but gave directions on how to make them in the instructions.

You could draw a big wedge piece but I didn't have any cardstock that large.

At first I thought the interior tube was a BT-70, but turned out to be a Centuri style ST-20.

I went to - 

https://www.payloadbay.com/page-Tools.html

and input the dimensions.

Note: Tube 1 is an ST-20, Tube 2 is a BT-80

The length should be 2.9". That was corrected before printing the shroud.

Here's the tail cone I printed on 110 lb. cardstock. 

This was cut out.

A glue tab was made and stuck to the shroud using a glue stick.