ASP Micro Sandia Sandhawk Build, Part 7, Fin Fillets & Streamer Attachment

The CA glue fillets were lightly sanded smooth with 400 grit before spray painting an overall gloss white.

This shows how small the model is, just under 7" tall.

After the first gloss white paint coat dried, I ran the backside of my blade down the fillets to feel for any dips.

One fillet did have some divots. Another CA fillet followed with light sanding.
 

The Mylar streamer is taped to the Kevlar line.

Scotch tape was set down, wider than the width of the streamer. 

After pressing in place, the overhanging tape was  trimmed off without cutting into the Kevlar.