Centuri Quasar Clone Build, Kit #KC-7, Part 2, Parts List

Here's the parts list from Jim Z's - Centuri Quasar #KC-7

This clone build had a goal - to use only leftover spare parts! No purchasing, no vendor order. My substitutions shown in italic

                Quasar build at right by Tim Morley, posted on YORF

1 Plastic Nose Cone N/C 5.5"L W/Cockpit Detail 

                Substitute Estes PNC-60H, 4 1/2" exposed, 

                to add 1" of tube

1 Shock Cord SC-18 16" L 

                Substitute 36" x 1/8" elastic

1 Shock Cord Fastener SCF-1 Self Stick 1

                Not needed with Baffle top tie 

 Chute Pack 16" Dia. 

                Substitute ASP Mylar 15" chute

 1 Ejection Baffle EB-16

                 Substitute old Semroc EB-16

1 Body Tube ST-16 7.5"L 

                Substitute Estes BT-60, very close! 

1 Launch Lug LL-3 1/8" x 3"L 

1 Balsa Sheet BFM-10 3"W x 12"L x 3/32"T 

3 Body Tube ST-5 3"

                Substitute Estes BT-5, same as Centuri ST-5 

3 Ramjet Nose Cones N/C Fits ST-5 

                Made from old balsa cones, tapered dowels, 

                couplers and tubes            

3 Ramjet Tail Cones N/C Fits ST-5  Plastic 

                Made from old balsa cones and Bic Pen barrel

1 Paper Shroud N/C ST-16 to ST-10 2.44 L

                Print from payloadbay.com - BT-50 to BT-60 

2 Centering Rings CR-1016 ST-10 to ST-16

                Substitute light ply 50/60 rings 

1 Sleeve Tube HTC-16 1.5"L 

                Substitute Estes JC-60C

1 Engine Tube (Intermediate) ST-10 4"L 

                Substitute BT-50 tube

1 Thrust Ring TR-7 

                Substitute Estes AR-520            

2 Centering Rings CR-10 ST-7 to ST-10 

                Substitute Estes AR-2050

1 Engine Tube ST-7 3"L

                Substitute Estes BT-20            

1 Engine Lock EL-1

                Substitute Estes EH-2

1 Corrugated Strip N/C 1 Decal Sheet N/C

                Substitute Chrome Monokote Trim