New Way N-21 Sky Fighter Build, Part 6, Engine Mount Gluing & Lug Gluing

The engine mount is glued in with the engine mount tube and outer tube ends even.

I used my flat sanding block to press the mount in and even it with the outside main airframe tube.

A rear fillet was applied using a Q-tip. 

The marking guide is folded on the dashed line.

Set it on the corner bend in the tube, over the engine hook extension.

The launch lug locations are marked and the lines extended down the length of the tube.

Since I already sprayed and sanded the tube, the filler/primer was scraped off for gluing on the launch lugs.

The long lugs (guns) go in front,

The shorter lugs are at the rear.

The lugs are in line to be slid over a launch rod.