Estes Condor #0807 Build, Part 16, Gluing Up The Wing Dihedral

I taped the dihedral guide pieces to my work surface. Otherwise the thin cardboard pieces will flop and fall under the wing halves.

After the glue dried there was a small gap where the two sides meet. This is on the bottom seam of the "V" shaped wing.

Some CWF filler was ran down the seam and sanded.

Filler/primer was shot down the center filled seam only.

The bottom of the "V" was carefully sanded.

The wing is ready for fitting under the fuselage.