Enerjet by Aerotech, Astrobee D Build, Part 1, Parts

All the parts:

There are two body tubes, both the same length at 27" long.

Two parachutes are included, the lower body descends on a 30" nylon chute, the upper body has a 22" chute.

The small white pieces are molded "screws" that will glue onto the scale launch lugs.

Included are both 1/4" lugs and conformal launch lugs.

In the center are the scale antennas.

The silver coil is the labyrinth ejection cooling system.

On the upper right is the aluminum motor retainer.

At the bottom is one of the four fins.

The decals are peel and stick.

Above the decals is a self adhesive foil strip that will wrap around the body.