Enerjet by Aerotech, Astrobee D Build, Part 28, Main Body Decals

Where you can, cut the decals close to the ink like on the "B" Aerojet General and "C" S/G stickers. 

The sticker thickness and clear border won't be as noticeable after spraying on the dull coat.

The long name decal is cut just outside the top and bottom ink.

The long ASTROBEE D ADD 010 decal is not at scale length. You can't set it at the 21.5" measurement from the rear and be able to cut it through the center of the B in Astrobee.

I set mine to be cut down the clear stencil line opening.

Wet the decal after peeling off the backing. Wet the body tube where the decal will sit for easier repositioning.

The C/G decal is set directly below the vertical line on the "D".