New decals were drawn up in Corel Draw.
I probably could have used the decal scan from Jim Z's but I like a challenge. It also looked like the Centuri kit decals were on a sheet taller than 11". Home print decals are a standard 8 1/2" x 11" size.
The original kit had some sort of embossed thermal foil used in attic insulation.
I did a post about it in February of 2020: CLICK HERE
This time around:
The second decal grid sheet on the right side shows my attempt at the solar panel fin coverings.
The 3" x 3" square fins will get a chrome Monokote skin followed by the blue grid water slide decal. Results were very good the first time this technique was tried: CLICK HERE
In the lower right of the solar panel decals are the fine ink lines used to finish the Mini Bomarc.
One bit that's not on the original decal sheet that might be fun to add to your sheet is a Gemini capsule hatch. It's a somewhat obscure feature on the airlock module of the actual Skylab space station.
ReplyDelete