This was a fun one! Not having to fill wood grain is welcome on a model this size. I didn't install the streamer, I'll just go with ...

Paint is pretty easy -  Overall orange. The tip of the nose cone is painted black. I could have probably masked it but it is small.  This wa...

The supplied Kevlar shock cord is longer than you'll need. I got a better idea of the length slipping the loose end through the body tub...

The tunnel piece has a rounded back to fit the curvature of the small body tube. The top needs to be shaped. I used 400 grit on a sanding bl...

I had some concerns and was a little confused when building the A.S.P. MMX Jayhawk. A quick email to Andy at A.S.P. got some easy answer...

Note : I've made a correction in the previous Part 3 post regarding the fin templates. Check Step 3 before cutting out the "wing...

CORRECTION :  On the template, the outside of the left and right dashed lines says "Root Edge". I took that to mean it was the roo...

Before sliding the couplers into the tubes - Round off the edges with some 400 grit sandpaper. The rounded coupler won't fold in the edg...

On the right is my original ASP MicroMaxx Jayhawk.  I've successfully launched it many times. It is truly a micro model rocket. Andy (fr...