The rail buttons are centered between two fins, on the other side of the INITIATOR name sticker. It's difficult to find the center on a ...

From the last Mega Initiator post -  With the O and R "cut" directly over the tube joint, sight down the body to make sure the ora...

Take it from an old typesetter -  "Os" are typically taller and extend beyond the baselines of the other letters. Be careful when ...

Using your aluminum angle -  Draw a pencil line down the BT-5 tube.  Pencil , not pen. Ink can bleed through the paper skin. Apply an even g...

Before gluing on a SRB - Check the last picture below Note the pencil line down the SRB gluing area. The pencil line also goes underneath, a...

Before the SRBs are glued on, the "A" sticker wrap is placed. The top of the SRB nose cones overlap the sticker. I placed a wrap o...

I outlined the black edges with masking tape strips, slightly over the blackened edge. Because of the different shape of the nose cone and c...