On the flipside (underside) -  Pencil mark the lug line, the ends just inside the 2 3/8" lug length. Using a straightedge, cut some ver...

I got the launch lug placement wrong!  I'm usually on top of these things, but for whatever reason the launch lug was glued on the top w...

Assembly is complete except for the parachute and shock cord ties. Time for paint! Note the dowel/engine casing painting wand locked in the ...

I no longer waste time with glue fillets on the sides of launch lugs. That glue line was straightened and the width narrowed by pinching you...

Stack the rudder assemblies to be sure the glued angles are consistent. If they don't line up, apply a little warmth with the low settin...

The root edges of the rudder fins have to be sanded at an angle. Mark the flat root edges shading with the side of a soft pencil. The pictur...

The Kevlar, elastic and heat shrink wrap are pushed down and through the engine mount for gluing into the main body tube. With the Kevlar li...