Semroc USS Andromeda KV-97, Part 8, Gluing The Radiator Rings

The trailing edge tip of the large wing/fin is even with the end of the body tube.
The picture shows how the top ring will fit into the root edge notch in the fin.






With the ring glue on, double check using the fin to be sure the back of the fin is even with the tube end.







Glue a ring, add a narrow fillet on each side, then glue on another ring.
TIP:You'll find it easier to fillet each ring individually as they are close together.
Use the same technique to glue on the second and third ring.

Here's all three rings in place prior to gluing on the two large and two smaller notched fins.