Pages

Friday, June 15, 2012

Estes Thor Agena Build Part 9 Vernier Shrouds




To start the notch, my 2' machine square was set down the length of the stick. This gave me an accurate 90 degree to rest my razor blade against.

The rounded top was scored and the notch cut with an X-Acto knife.






After carving the notch, a square diamond file smoothed out the bottom surface.


After the basic forming, a piece was cut off at 3/8".
I always cut a little long so I can sand and smooth it up to the correct length.

I'm building two models so four were made.

No comments:

Post a Comment