Estes Mini Shuttle Build. Part 7, Masking

I used Scotch tape for the mask. The edges were blacked with a permanent marker so you can see it against the white background.

The Scotch tape was set down first, it took a few pieces to fit around the angled line.
In the picture the rudder has masking tape covering the back.

The wings and the rest of the body have been covered with masking tape.

This is the underside, it will be painted black overall.

Under the trailing edge you can see the masking tape overhanging the edge. I should have probably used the Scotch tape and got a better seal.

Check out tomorrows post # 8 for results.