TIP: Instead of using a wet brush or paper towel to work out bubbles, use a damp Q-tip to set the decal into place.
Work the air bubbles out by rolling from the center to the edges.
After the decals had set up for a day they got a coat of Future.
I used the Q-tips again. Dip the tip in the Future, wipe off the excess and lightly "roll" on an overcoat.
A canopy decal side is made up of two pieces.
The larger center "B" piece probably wouldn't easily fold over the ridge down the middle. I cut the decal in two.
Set the "B" sides down first.
After it dries set the "C" piece down as an overlay.
Do your best to "mirror" the two C pieces getting an even fit over the top and raised canopy.
After everything dries a new razor blade trimmed down the overhang.
No comments:
Post a Comment