The nose cone mask went well except for a small lift on the right side.
I used a fine point Sharpie to color in the gap. Again the metallic paint is forgiving and after a little bit of Future, the touch up isn't noticeable.
Here's the mask for the engine mount.
There is two pieces of masking tape (sticky side out) in the engine mount tube to keep out any paint.
The engine hook has a strip of Scotch tape over it.
The middle shows some light sanding after the second coat.
Sanding between coats can help fill any gaps on the root edges of the vanes.
The third picture is after the final third coat, all the tape has been removed.
A great thing about this paint - It seems to dry to the touch in just five minutes.
No comments:
Post a Comment