Estes Condor #0807 Build, Part 14, Vertical Stabilizers & Wing Tips

I found myself referring to the face card picture a few times. These are not a standard fin layout.

This was probably a prototype model, not a production kit.

All wing and wing tips are rounded. The instructions only say to round the wings and wing tips. Even the edges of the glider balsa remain square.

I sanded away a little more of the gluing line. 

There is some 400 grit rolled around a Q-Tip.

Here's the vertical stabilizers in position. 

I haven't sanded the glue line on the outside surfaces yet.

The wing tips are glued in place.

On the right - 

Notice the leading edge of the wing tips are a continuation of the large wing leading edge.