The ones that are to be glued in got the shoulders built up with two lines of Fabri-Tac.
Let the glue lines dry before trying the new fit in the tubes.
The nose cone still had a seam recess after sanding down the raised mold line.
This was filled with a bead of medium CA glue. This CA bead will take a while to dry.
Sand to surface with 400 grit on a block.
The molded eyelet on the third stage was small and thin. I wouldn't trust it at ejection. The small eyelet reminds me of the Bullpup kit nose cone. I've had that one break in the past.
A hole was drilled in the shoulder. The shock cord will be tied through it and the larger hole in the base.
No comments:
Post a Comment