Centurion Project Part 1 Parts

Here's the parts for the Semroc Centurion, everything except for the engine mount.
As mentioned before, I'll be making three different mounts.
A single 18mm, a two engine 18mm cluster and a single 24mm mount.

I'll also be making the Estes Cosmic Explorer model.

Here's the two different nose cones, side by side.
The Semroc Centurion nose cone is on the left, the Estes Cosmic Explorer NC on the right.

The Semroc Centurion body tube is an ST-16, a little over 1.6" diameter.
The slotted tube on the right is a BT-55 from the Estes Cosmic Explorer.





The fins share the same profile.
The Semroc Centurion are on the sheet below the tabbed TTW fin from the Cosmic Explorer kit.
The Estes Cosmic Explorer fins are slightly smaller than the fins in the Semroc Centurion kit. The Semroc fins are not thru-the-wall or TTW.

The Estes Cosmic Explorer will be built first.