Re-Issue MPC Vostok Kit Parts

There is a thread on YORF about the reissued MPC Vostok kit HERE

"The Mole" posted a picture of the plastic kit parts.
There was a question if the plastic "flying" parts would be included - They Are!

From my post:
It's all there -
The large fins, both large and small "shock cord anchors" and the second less detailed nozzle plate.
The launch lugs are still molded into the upper transition and flight nozzle plate.

Needed for flight conversion - 
9" long 20mm tube (BT-20 could work if built up at the top and bottom)
2 3/4" long "engine compartment" tube (if using Quest 20mm tube), Engine hook
Exterior shock cord mount, Shock Cord, Parachute (20" Mylar chute came with the kit)
.16 oz. nose weight

There is plenty of room for the clay weight in the Vostok capsule.