Semroc MMX Blue Bird Zero Build, Part 8, Coupler Gluing and Streamer

Run the Kevlar line through the upper, blue body tube.

A line of glue was set into the upper tube and the tube slid over the coupler.




The "screw eye" dowel was pushed into the nose cone base and marked with a pencil. Cut the toothpick off at the pencil line.

Knot the end of the Kevlar line and push it into the hole in the nose cone base.
Put some glue into the hole and press the toothpick piece into the hole, locking the Kevlar line into place.

The streamer material is cut in two and taped to the Kevlar line.