Here's another build from the Enerjet by Aerotech line, the QUAD RUNNER.
This was part of the Quest Advanced Rocketry line. 2" diameter, 27.5" tall with a four 18mm motor cluster. This larger kit line is transitioning to the Enerjet by Aerotech brand.
The kit has been revised and now comes with a 24mm adapter. If you want to try a cluster, the four engine mount is also included.
All the parts:
2" diameter nose cone and and (a bit heavier wall) body tube.
1/4" elastic and Kevlar Shock Cord
A 16" rip stop nylon parachute
A 16" rip stop nylon parachute
3/32" thick surface mount balsa fins
The four engine cluster mount
Two 3/16" launch lugs
Instructions and sticker décor.
24mm engine mount shown in next post
Some parts of interest:
A paper masking guide template
A large sheet of stickers.
When I built mine, it only came in the cluster configuration. The name doesn't really fit, if you build it as a single 24mm,but I get their choice. Clusters aren't for everyone.
ReplyDeleteI've never launched mine with more than two motors. Some day.