I picked this one up a few years ago.
Started it, then set it aside.
This was a boxed kit, I may have picked up at WalMart.
This one reminds me of the old Estes X-Ray.
Two sets of five fins, ten fins in total.
These will be fun to glue on, line up and fillet the close fins.
Here's the specs -
All the parts:
The parachute isn't printed. At the time this kit was produced, there was some concerns about the ink.
You can see the fins, balsa nose cone and adapter already have a sanded filler coat of CWF. That's as far as I got previously.
Only one fin set is shown here. There are five sets of two fins.
No comments:
Post a Comment