Estes Shark #1111, Build, Part 10, Low Position Decals

The red, white and blue fin decals go on both sides of one fin. Check the fin decal in relation to the tunnel positions in the instructions.

 

Trim the top and bottom of the fin decals close to the ink. You don't want clear border extending beyond the rounded fin edge.

The "ARMED" decals are set above the top of the fins. Do your best to visually center them between the fins.

The black roll pattern wrap is set above the upper ARMED decal. Wet the body tube before setting the decal down. You'll want a slippery surface to allow movement when lining up both ends of the decal.