Estes Dragon Ship 7 #1345, Part 9, Canopy Fin Fitting

After a dry fit of of the top canopy fin, I found the notch wasn't high enough. I didn't want to cut into the fin, so I glued a shim under the back.
The shim was sanded, filled and the entire fin got a shot of filler/primer.

I went back and fixed the dorsal fin template.
Here's the better fit of the dorsal canopy fin.






The nose cone seam was still there after sanding down the filler/primer.
I went back with a bead of medium CA and sanded to surface.