FlisKits Interloper Build Part 2 Color Plan

I took the original drawing and started dropping in possible color combinations.

This model will have three main colors - silver, orange and white. Black trim will be on all the toothpicks and at the rear of the main body tube.

Because of the size of the model, masking would be difficult. I'll pre-finish, spray and then assemble where possible.

Above the BT-20, silver will be seen between the white vanes and continue up the main body.

The long main body tube will change from silver to black at the rear, under the scalloped BT-20. The black will show through at the bottom between the white vanes.

All the toothpick pieces will be black.

Fins and the upper taper of the nose cone will be orange.

This FlisKit has decals. After looking at the finished, painted model, I'll decide which ones to use.